0:100  0:100  MemLog inited, TSC freq: 2304340520
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 2.1.2017,  10:40:39 (GMT)
0:100  0:000  Starting Clover revision: 3949 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.2 | XCODE: 8.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F24B7D60-E157-4BFC-83ED-843057E3471A,0x28,0x64000) @848C4798
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 22430336
0:100  0:000  SmbiosTable.Type17->PartNumber = CT8G4SFD8213.C16FBD2
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: ' ' with board 'NUC6i3SYB'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=406E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 192
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003547
0:100  0:000  MSR 0xE2 before patch 7E008004
0:100  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:100  0:000  MSR 0xE4              00021814
0:100  0:000  MSR 0xCE              0004043B_F1011700
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=95MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x4E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 23.0/4
0:100  0:000  Turbo: 23/23/23/23
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 2
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 2200 MHz
0:100  0:000  TSC: 2200 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 1904 class=060000
0:100  0:000  PCI (00|00:02.00) : 8086 1916 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 520 (Intel)
0:100  0:000  PCI (00|00:14.00) : 8086 9D2F class=0C0330
0:100  0:000  PCI (00|00:14.02) : 8086 9D31 class=118000
0:100  0:000  PCI (00|00:16.00) : 8086 9D3A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 9D03 class=010601
0:100  0:000  PCI (00|00:1E.00) : 8086 9D27 class=118000
0:100  0:000  PCI (00|00:1E.06) : 8086 9D2D class=080501
0:100  0:000  PCI (00|00:1F.00) : 8086 9D48 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 9D21 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 9D70 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 9D23 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : 8086 1570 class=020000
0:100  0:000   - LAN: 0 Vendor=Intel
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:101  0:001  EFI\CLOVER\config.plist loaded: Success
0:101  0:000  === [ GetListOfThemes ] ===================================
0:103  0:001  - [00]: BGM
0:108  0:005  - [01]: christmas - bad theme because theme.plist can't be load
0:108  0:000  - [01]: embedded
0:108  0:000  - [01]: newyear
0:110  0:001  - [02]: random
0:110  0:000  === [ Found config plists ] ===============================
0:110  0:000  - config.plist
0:110  0:000  === [ GetEarlyUserSettings ] ==============================
0:110  0:000  timeout set to 3
0:111  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:111  0:000  KextsToPatch: 4 requested
0:111  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (Port 5 HDMI fix) :: BinPatch :: data len: 8
0:111  0:000   - [01]: AppleHDA (t1-110.9-10.11-AppleHDA/Realtek ALC283) :: BinPatch :: data len: 4
0:111  0:000   - [02]: IOGraphicsFamily (Boot graphics glitch, 10.10.x/10.11.x (credit lisai9093, cecekpawon)) :: patch disabled, skipped
0:111  0:000   - [03]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:111  0:000  Error in Early settings0: Not Found
0:111  0:000  === [ LoadDrivers ] =======================================
0:112  0:001  Loading AppleImageCodec-64.efi  status=Success
0:113  0:000  Loading AppleKeyAggregator-64.efi  status=Success
0:113  0:000  Loading AppleUITheme-64.efi  status=Success
0:113  0:000  Loading DataHubDxe-64.efi  status=Success
0:117  0:003  Loading FirmwareVolume-64.efi  status=Success
0:118  0:000  Loading FSInject-64.efi  status=Success
0:118  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:119  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:119  0:000  Loading SMCHelper-64.efi  status=Success
0:119  0:000  Loading HFSPlus-64.efi  status=Success
0:122  0:003   - driver needs connecting
0:122  0:000  1 drivers needs connecting ...
0:122  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:122  0:000  HFS+ driver loaded
0:122  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:227  0:105  === [ InitScreen ] ========================================
0:227  0:000  SetMaxResolution: found best mode 0: 1600x1200
0:227  0:000   - already set
0:227  0:000  Console modes reported: 6, available modes:
0:228  0:000   - [01]: 200x63 (current mode)
0:228  0:000   - [02]: 80x50
0:228  0:000   - [03]: 100x31
0:228  0:000   - [06]: 128x40
0:228  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F24B7D60-E157-4BFC-83ED-843057E3471A,0x28,0x64000)
0:228  0:000  Using embedded font: Success
0:229  0:000  === [ GetMacAddress ] =====================================
0:229  0:000  === [ ScanSPD ] ===========================================
0:229  0:000  SMBus device : 8086 9D23 class=0C0500 status=Success
0:229  0:000  SMBus CmdReg: 0x3
0:229  0:000  Scanning SMBus [8086:9D23], mmio: 0xDF04A004, ioport: 0xF040, hostc: 0x1
0:229  0:000  Slots to scan [8]...
0:230  0:000  SPD[0]: Type 12 @0x50
0:247  0:017  Unknown vendor bank=0x85 code=0x9B
0:247  0:000  DDR speed 2132MHz
0:247  0:000  Slot: 0 Type 26 8192MB 2132MHz Vendor=NoName PartNo=CT8G4SFD8213.C16FBD2 SerialNo=0E00020B00030204
0:249  0:001  === [ GetAcpiTablesList ] =================================
0:282  0:033  Get Acpi Tables List from RSDT:
0:282  0:000   - [00]: FACP  NUC6i3SY len=132
0:282  0:000   - [01]: APIC  NUC6i3SY len=132
0:282  0:000   - [02]: FPDT  NUC6i3SY len=68
0:282  0:000   - [03]: FIDT  NUC6i3SY len=156
0:282  0:000   - [04]: MCFG  NUC6i3SY len=60
0:282  0:000   - [05]: HPET  NUC6i3SY len=56
0:282  0:000   - [06]: LPIT  NUC6i3SY len=148
0:282  0:000   - [07]: SSDT  NUC6i3SY len=584
0:282  0:000   - [08]: SSDT  NUC6i3SY len=11182
0:282  0:000   - [09]: SSDT  NUC6i3SY len=3043
0:282  0:000   - [10]: SSDT  NUC6i3SY len=1187
0:282  0:000   - [11]: DBGP  NUC6i3SY len=52
0:282  0:000   - [12]: DBG2  NUC6i3SY len=84
0:282  0:000   - [13]: SSDT  NUC6i3SY len=1134
0:282  0:000   - [14]: SSDT  NUC6i3SY len=21612
0:282  0:000   - [15]: UEFI  NUC6i3SY len=66
0:282  0:000   - [16]: SSDT  NUC6i3SY len=3699
0:282  0:000   - [17]: BGRT  NUC6i3SY len=56
0:282  0:000  Calibrated TSC frequency =2304340520 =2304MHz
0:283  0:000  === [ GetUserSettings ] ===================================
0:283  0:000  USB FixOwnership: no
0:283  0:000   - final DSDT Fix mask=00000800
0:283  0:000  PatchesDSDT: 1 requested
0:283  0:000   - [00]: (Fix Skylake audio by renaming HDAS to HDEF) lenToFind: 4, lenToReplace: 4
0:283  0:000  ChassisType: 0xD
0:283  0:000  === [ ScanVolumes ] =======================================
0:283  0:000  Found 4 volumes with blockIO
0:283  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
0:284  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F24B7D60-E157-4BFC-83ED-843057E3471A,0x28,0x64000)
0:284  0:000          Result of bootcode detection: bootable unknown (legacy)
0:284  0:000          This is SelfVolume !!
0:284  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,48512D63-CCF4-4D58-BD0C-3B2CB116137D,0x64028,0xDDFAC40)
0:285  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,B8702840-5475-4083-BEAE-4C467908200D,0xDE5EC68,0x135F20)
0:286  0:000  === [ InitTheme ] =========================================
0:286  0:000  Using theme 'newyear' (EFI\CLOVER\themes\newyear)
0:286  0:000  OS main and drive as badge
0:287  0:001  Loading font from ThemeDir: Success
0:288  0:000  Choosing theme newyear
0:288  0:000  after NVRAM boot-args=-v dart=0
0:288  0:000  === [ Dump SMC keys from NVRAM ] ==========================
0:288  0:000  found AppleSMC protocol
0:296  0:007     fakesmc-key-#KEY-ui32:00 00 00 16 
0:296  0:000     fakesmc-key-$Adr-ui32:00 00 03 00 
0:297  0:000     fakesmc-key-$Num-ui8 :01 
0:298  0:000     fakesmc-key-RMde-char:41 
0:299  0:001     fakesmc-key-RPlt-ch8*:6A 39 35 00 00 00 00 00 
0:300  0:000     fakesmc-key-RBr -ch8*:6A 39 35 00 00 00 00 00 
0:301  0:000     fakesmc-key-EPCI-ui32:08 C0 F0 00 
0:301  0:000     fakesmc-key-REV -ch8*:02 33 0F 00 00 10 
0:302  0:000     fakesmc-key-BEMB-flag:00 
0:303  0:000     fakesmc-key-BATP-flag:00 
0:303  0:000     fakesmc-key-BNum-ui8 :00 
0:304  0:000     fakesmc-key-MSTc-ui8 :00 
0:305  0:000     fakesmc-key-MSAc-ui16:00 00 
0:305  0:000     fakesmc-key-MSLD-ui8 :00 
0:306  0:000     fakesmc-key-MSWr-ui8 :19 
0:310  0:003     fakesmc-key-MSPS-ui16:00 03 
0:310  0:000     fakesmc-key-$Num-ui8:01 
0:311  0:000     fakesmc-key-BNum-ui8:00 
0:312  0:000     fakesmc-key-MSTc-ui8:00 
0:312  0:000     fakesmc-key-MSLD-ui8:00 
0:313  0:000     fakesmc-key-MSWr-ui8:19 
0:314  0:000     fakesmc-key-MSFW-ui8:01 00 
0:322  0:008  === [ ScanLoader ] ========================================
0:322  0:000  - [01]: 'EFI'
0:333  0:010  - [02]: 'NUC6i3'
0:335  0:002          AddLoaderEntry for Volume Name=NUC6i3
0:336  0:001      Check if volume Is Hibernated:
0:336  0:000      Check sleep image 'by signature':
0:340  0:003      using default sleep image name = \private\var\vm\sleepimage
0:342  0:001      sleepimage not found -> Not Found
0:342  0:000      hibernated: no - sign
0:348  0:006  - [03]: 'Recovery HD'
0:349  0:000          AddLoaderEntry for Volume Name=Recovery HD
0:356  0:006  Scanning legacy ...
0:356  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:356  0:000   1: 'EFI' (legacy) not legacy
0:356  0:000   2: 'NUC6i3' (legacy) not legacy
0:356  0:000   3: 'Recovery HD' (legacy) not legacy
0:356  0:000  === [ AddCustomTool ] =====================================
0:356  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:356  0:000  Checking EFI partition Volume 1 for Clover
0:356  0:000   Found Clover
0:357  0:001  === [ GetEfiBootDeviceFromNvram ] =========================
0:358  0:000  Default boot entry not found
0:358  0:000  DefaultIndex=-1 and MainMenu.EntryCount=8
0:358  0:000  Use anime=elka_1 frames=27
0:801  0:443  SelectionSmallFileName != NULL
0:802  0:000  SelectionBigFileName != NULL
0:807  0:005  Found Mouse device:
0:807  0:000  GUI ready
2:785  1:978  BootVariable of the entry is empty
2:785  0:000  === [ StartLoader ] =======================================
2:785  0:000  Finally: Bus=100188kHz CPU=2304MHz
2:785  0:000  Loading boot.efi  status=Success
2:833  0:048  GetOSVersion: 10.11.6 (15G31)
2:833  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
2:833  0:000  Filtering KextPatches:
2:833  0:000   - [00]: AppleIntelSKLGraphicsFramebuffer (Port 5 HDMI fix) :: BinPatch :: [OS: 10.11.6 | MatchOS: All | MatchBuild: All] ==> allowed
2:833  0:000   - [01]: AppleHDA (t1-110.9-10.11-AppleHDA/Realtek ALC283) :: BinPatch :: [OS: 10.11.6 | MatchOS: All | MatchBuild: All] ==> allowed
2:833  0:000   - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.11.6 | MatchOS: All | MatchBuild: All] ==> allowed
2:833  0:000  === [ PatchSmbios ] =======================================
2:833  0:000  insert table 9 for dev 1F:6
2:834  0:001  Channels: 2
2:834  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
2:834  0:000  SMBIOS Type 17 Index = 0 => 0 0:
2:834  0:000  BANK0 DIMM0 2132MHz 8192MB
2:834  0:000  SMBIOS Type 17 Index = 1 => 2 2:
2:834  0:000  BANK1 DIMM0 EMPTY
2:834  0:000  mTotalSystemMemory = 8192
2:834  0:000  NumberOfMemoryDevices = 2
2:834  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
2:834  0:000  Table 131 is present, CPUType=31
2:834  0:000  Change to: 905
2:834  0:000  === [ PatchACPI ] =========================================
2:834  0:000  RSDT 0x86550028
2:834  0:000  FADT from RSDT: 0x86550158
2:834  0:000  XSDT 0x86550098
2:834  0:000  FADT from XSDT: 0x86571EF8
2:834  0:000  Xsdt reallocation done
2:834  0:000  old FADT length=10C
2:835  0:000  Apply DsdtFixMask=0x00000800 old way
2:835  0:000     drop _DSM mask=0x0000
2:835  0:000  === [ FixBiosDsdt ] =======================================
2:835  0:000  VideoCard devID=0x19168086
2:835  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
2:835  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
2:853  0:018  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
2:853  0:000  Patching DSDT:
2:853  0:000   - [00]: pattern 48444153, patched at: [ (9B6A) (1B06) (8E) (D) (A1) (6A) ]
2:853  0:000  first CPU found at 8538 offset 853B
2:853  0:000  score candidate at 8534
2:853  0:000  score inserted in acpi_cpu_score _PR_
2:853  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
2:854  0:000  Found PCIROOTUID = 0
2:854  0:000  === [ ACPIDropTables ] ====================================
2:854  0:000  === [ PatchAllSSDT ] ======================================
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0x248
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0x2BAE
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0xBE3
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0x4A3
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0x46E
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0x546C
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Patch table: SSDT  NUC6i3SY
2:854  0:000   SSDT len = 0xE73
2:854  0:000  Patching SSDT:
2:854  0:000   - [00]: pattern 48444153, bin not found / already patched!
2:854  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
2:854  0:000   Xsdt has tables count=18
2:854  0:000  corrected XSDT length=180
2:854  0:000  === [ ACPIPatchedAML ] ====================================
2:854  0:000  Start: Processing Patched AML(s): Unsorted
2:854  0:000  Inserting SSDT-IGPU.aml from EFI\CLOVER\ACPI\patched ... Success
2:854  0:000  End: Processing Patched AML(s)
2:854  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
2:854  0:000  === [ RestSetup macOS ] ===================================
2:854  0:000  EdidDiscovered size=128
2:854  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  38  A3
2:854  0:000  010  |  2B  66  01  01  01  01  0C  0E  01  03
2:854  0:000  020  |  80  29  1F  78  EE  60  E5  A3  57  4B
2:854  0:000  030  |  9C  25  11  50  54  BF  EF  80  31  59
2:854  0:000  040  |  45  59  61  59  71  4F  81  4F  81  80
2:854  0:000  050  |  81  99  A9  40  48  3F  40  30  62  B0
2:854  0:000  060  |  32  40  40  C0  13  00  98  32  11  00
2:854  0:000  070  |  00  1E  00  00  00  FD  00  30  57  1E
2:854  0:000  080  |  60  11  00  0A  20  20  20  20  20  20
2:854  0:000  090  |  00  00  00  FC  00  4C  43  44  32  30
2:854  0:000  100  |  38  30  55  58  2B  0A  20  20  00  00
2:854  0:000  110  |  00  FF  00  34  33  30  30  35  30  30
2:854  0:000  120  |  33  59  42  0A  20  20  00  14
2:854  0:000  Intel Intel HD Graphics 520 [8086:1916] :: PciRoot(0x0)\Pci(0x2,0x0)
2:854  0:000  Intel GFX revision  =0x7
2:855  0:000   RCBA disabled; cannot use it
2:855  0:000   setting specified layout-id=1 (0x1)
2:855  0:000  stringlength = 1252
2:855  0:000  CurrentMode: Width=1600 Height=1200
2:855  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 848C4498
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 848C4498
2:873  0:017  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
2:873  0:000    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
2:877  0:003    Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext
2:880  0:003      Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
2:884  0:004    Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext
2:886  0:001    Extra kext: EFI\CLOVER\kexts\Other\Injector-algNUC6i3.kext
2:887  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
2:889  0:001  Custom boot screen not used because entry has unset use graphics

